Best Tube Notchers Review – Top Picks With Buying Guide

Several of our readers have asked us what we recommended as the best tube notcher. In an effort to make certain that we give our readers factual information that is truly beneficial we asked several welding professionals their opinions on these tools.

The professionals gave us a list of tools that they either use regularly or have used in the past.

Best Tube Notchers

They made sure we understood the differences in these tools, and what features make one notcher better than another. We have included their recommendations, and then made a list of features to compare when you are selecting a notcher.

Best Tube Notcher Reviews 2020 

1. Bosch HDG11 Diamond Hole Saw Set


  • Weight: N/A
  • Dimensions: N/A
  • Part number: HDG114
  • Size: 11 Piece Set
  • Fast and easy starts
Bosch HDG11 Diamond Hole Saw Set

A complete hole saw set in a convenient carry case. The 11 pieces of this set will pretty much assure you that you have the ability to make whatever size hole you need to make. It comes with a mandrel, an auto-start pilot bit, and hole saws in sizes of ¼” to 2-1/2”.

With this saw set, the pilot bit saves you from having to drill a pilot hole in your tubing. The auto start pilot bit has a special grind ability that allows you to start the perfect hole in the right size and depth. It is spring-loaded and has a retractable shaft. It saves time and effort when you are working.

The hole saws are vacuum brazed diamond-tipped so they have the ability to cut at a faster rate. The diamond tips are harder than most other cutting tips so they last longer than the average hole saws do.

The teeth on the hole saws are segmented so they get a better grip and are able to work into the metal better. You get precision notches that are even and the proper depth every time.

The quick-change adapter ensures that you can easily change from one saw orbit to another one with very little effort.

2. Erie Tools Tube And Pipe Notcher Tool


  • Weight: 10.1 pounds
  • Dimensions: 12.5 x 7.3 x 7 inches
  • Part number: TT-376202
  • Spindle Adapter: 1/2 to 5/8 in
  • Mounting bracket: 0-90°
Erie Tools Tube And Pipe Notcher Tool

You can make your drill press more beneficial by adding this pipe notcher to your tool arsenal. It has the ability to cut pipe and tubing into a wide variety of shapes and sizes. It can create any angle you desire starting at zero degrees and moving up to 60 degrees in some metals. It makes a perfect 0 to 45-degree angle in aluminum tubing or pipe.

The frame of this piece of equipment is crafted from steel so it is sturdy and durable. It is capable of holding your tubing or pipe in position without letting it slip or slide.

It is positioned on an adjustable base that can be adapted so you can use in on any work surface, bench, or table. It can also easily be mounted on your drill press.

It has the perfect design and abilities for anyone who builds roll cages, works on bike frames like mini bikes, or works around the home with metal tubing or pipe. It can help you fabricate exactly what you need in a short amount of time.

3. DEWALT D180005 Hole Saw Kit


  • Weight: N/A
  • Dimensions: 3 x 9.8 x 7.3 inches
  • Part number: D180005
  • Material: Metal
  • Made in the USA
DEWALT D180005 Hole Saw Kit

Dewalt has put together a hole saw kit containing 14 pieces. This kit is just about the only hole saw equipment you will ever need to have. The hole saws are designed with hardened backing plates that prevent warping and the stripping of threads. They also cut deep so you have more efficiency and increased versatility.

The saws have a double tooth design. This allows them to get a firm grip so they cut into the metal quicker and with greater precision. The double teeth also allow the saws to last longer.

In the kit, you get a plastic carrying case to keep all of your pieces together. There is also a small and a large quick-change mandrel so changing elements is easy and fast. You get 11 varied hole saws-all with double teeth and replacement parts. Inside the carry, the case lid is a diagram detailing the sizes of each hole saw and which quick-change mandrel to use with each one.

The included hole saws are sizes ¾”, 7/8”, 1-1/8”, 1-3/8”, 1-1/2”, 1-3/4”,2”,2-1/8”, 2-1/4”, and 2-1/2”. The kit is perfect for electrical workers, door lock installation and for plumbers.

4. Kaka PN-1/2S Hole Saw Pipe Tube Notcher


  • Weight: 9.9 pounds
  • Dimensions: 12.6 x 8.2 x 7 inches
  • Model number: PN-1/2S
  • Size: Small
  • Material: Metal
Kaka PN-1/2S Hole Saw Pipe Tube Notcher

Kaka PN-1/2S is a pipe notcher that will make sure that you can make secure welds. It can make round cuts in pipes and tubes of many different sizes. It is versatile enough to be used with your drill press or with your handheld electric drill. If you have to work away from your shop being able to use this tool with the handheld drill will make things a lot easier for you.

The mounting bracket is completely adjustable. By adjusting the mounting bracket you change the angle that the hole saw cuts at. When you need to cut compound notch angles you will be able to easily perform this action with precision.

This tool is designed to be used with a ½” chuck. It is capable of cutting angles in degrees from 0 to 60. The angle changes are selected in one-inch increments so you always get the exact angle you need. It can cut tubing that is up to 2” in diameter.

This tool weighs less than ten pounds so it is very easy for you to carry with you or move and reposition. It creates precision cuts every time and makes it possible for you to get clean welds and perfect connections.

5. Woodward Fab Pipe and Tube Hole Saw Notcher


  • Weight: N/A
  • Dimensions: N/A
  • Part number: 4545593
  • 2" Pipe & Tube saw.
  • 1 year warranty
Woodward Fab Pipe and Tube Hole Saw Notcher

This notcher will create angles up to 90 degrees. It has an angle adjustment that is easy to read and easy to adjust. You can set the tool to create the perfect angle in just a few seconds.

It has the ability to cut pipes and tubing that are as big around as two inches. It makes crisp and precise cuts that allow you to make clean and perfect welds. It also makes cuts so precise that fitting the pieces together later is as easy as pie.

The clamp holds your tubing and pipe securely while you work. You will find that this is an affordable piece of equipment that will give you the ability to make your precise cuts and work with tubing and pipe. It is durable and dependable.

It is perfect for small shops that build roll cages or work on bike frames. It is also a great tool for the homeowner or craft work that will be working with round pipes and tubing.

6. VKRP Industrial Professional Pipe and Tube Notcher


  • Weight: N/A
  • Dimensions: N/A
  • Works with any half inchs drill.
  • Notches in 3/4" to 3" Tubing
  • Accepts standard hole saws
VKRP Industrial Professional Pipe and Tube Notcher

This is not a typical tubing notcher. It is an industrial-strength notching tool that has the ability to cut larger tubes than most of your common notching tools do. It is capable of being used on pipes and tubes that are between ¾” and 3”.

This piece of equipment is adjustable up to 50 degrees. It has the capacity to create angles from 90 degrees up to 150 degrees that are precise. You easily make angle adjustments by loosening the bolt, using one hand to adjust the angle to your desired angle and then use the other hand to lock the bearing block back into position.

It is able to accept the majority of standard hole saws and will work with any ½” drill. This tubing notcher does not come with a hole saw you must by them as a separate accessory. It can be mounted on a bench or in a vise depending on your circumstances and preferences.

Buying Guide for Selecting the Best Tube Notcher

If you have decided that you could benefit from owning a tube notcher you need to consider a few features before you choose one of these tools. The following tips and feature descriptions will give you the ability to compare tube notching equipment and decide which one you will be the happiest with.

Tube notchers seem to be all alike. The differences in these tools may be slight, but that slight difference is enough to make a big difference in their performance on certain materials.


The first consideration of a tube notcher should be what the tool can cut. You want to get a notcher that is capable of cutting a large variety of sizes. That way you are not limited on the materials you can work with. Your best option is a notcher than can create holes between ¼” to 2- ½”.


The two main tube notcher designs allow for the tool to either be held in your hand or mounted to your drill press. You have to decide which of these styles will be the most beneficial for you.

Do they require a pilot hole?

Some notchers will require you to make a pilot hole in the material before the notcher can cut it. Auto start bits will eliminate the need for these holes and allow you to work quicker with less trouble.

Heat Concern

You want to find a notcher that has segmented teeth that reduces the amount of debris created and reduces the amount of heat created. The last thing you want is for your tool to overheat while you are working and cause you to have to stop and wait for it to cool down.

Water Requirements

Some tool notchers will require you to use water to keep your heat reduced the entire time that you are cutting. Other notchers will allow you to work with little or no water. The no water or little water notching tools will allow you to work faster with less aggravation.

Backing Plate

If the hole notcher has a backing plate then it can help to prevent things like warping and stripping of threads.

Frequently Asked Questions

How to use a tube notcher?

When you start cutting your tube you want to cut the tube slightly larger than what you actually want if your angle is less than 45 degrees. If the angle is more than 45 degrees cut the tube exactly to the length that you desire. 

Set your notcher to the angle you wish to cut. Then position the tube into the notcher so that the centerline is showing at the top. This will have your tube situated at a 90-degree angle to the center of your hole saw.

Make your notch in your tubing. Be careful to remove your snap collar or move it out of the way prior to making the cut.

How does a tube notcher work?  

A tube notcher has very sharp teeth. The tube notcher spins and the teeth saw into the tubing that you wish to place a notch into. You must carefully choose what angle you need the tube notched in and set your notching tool up so that it can create that perfect angle.

To have complete accuracy with a tubing notching tool you must make accurate measurements and mark the tubing precisely before you begin.

Stand in such a way that you are viewing the tube from a right angle perspective to ensure that your cuts are precise.

Final Note

A tubing notcher helps you to make notches or holes in the tubing so you can join it and make a stronger finished project. It is possible to make these notches without one of these tools, but having a tubing notcher makes your work more precise, and makes it easier to do.

Richard Boyer

Richard wants to educate you, inform you, and prepare you to make the best decision you can concerning welding related items.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: