Lotos LTP5000D Review – Is It Worth The Money?

Last Updated on: by Richard Boyer

With the proliferation of inefficient plasma cutters, it's essential to have tools that cut through rough plates seamlessly. Usually, low-quality cutting tools are slow when they handle harder plates like aluminum.

If your cutting application is continuous, then you need a tool that uses pilot arc technology. It's not just any type, but plasma cutters with non-touch pilot arc design. The Lotos LTP5000D fits this description. Its design allows you to make severance and clean cuts on 3/4 and 1/2-inch plates respectively.

Read more: In depth reviews on top 4 Lotos welders.

Lotos LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V and 220V

Also, the pilot arc torch leaves a little slag when it cuts through dirty surfaces of aluminum, steel, and copper plates. Also, it seems like your ideal plasma cutter because of the power cord design. With options for both 220V or 110V power cords, you can replace plugs before cutting light and thick materials. Unlike the Powermax 45 XP, the dual voltage feature of this model requires a pigtail.

As a portable plasma cutter, it has a compact weather-resistant housing and user-friendly handle. Regardless of your work environment, you can enjoy the best performance of this tool. However, this review tells you how some important features and technology make the LTP5000D plasma cutter an excellent choice.

Features of This Lotos LTP5000D Plasma Cutter

Quick Installation

It comes with an air hose unit and a type-D NPT 1/4-inch plug. While you can connect 110V and 220V pigtail adapters, the installation process is faster with this design. Except your compression system doesn't use stand couplers, this unit's quick-connect regulator (for air pressure) is compatible with several air compressors.

Non-Touch Pilot Arc Technology

Do you need to maintain steady cuts through rusty, dirty, and painted metal plates? This non-touch pilot ARC technology ensures zero contact between the metal surfaces and the torch's tip. Also, non-touch technology makes consumables last longer with good quality. Usually, this type of technique leaves impressive perforations and cuts on metals.

Automatic Dual Voltage And Frequency

Get a pigtail adapter that's compatible with the dual-frequency (50/60Hz) design of this LTP5000D cutter. If you don't want to run this plasma cutter at 110V, boost the amperage to 220V (maximum) and cut thick metals.

While the duty cycle rating is 60% @ 50 A, a steady power supply ensures the nozzle burns brightly. Unlike other plasma cutters, this Air Inverter type has built-in MOSFET/IGBT transistors. It's this electrical component that ensures high power output when you cut thick metal plates.


  • Affordability
  • Steady airflow
  • Efficient Air Inverter power technology
  • Dual voltage capabilities
  • Non-touch Pilot Arc technology


  • Its 10-ft torch cable is to short, and you might lack the ease of moving around tight spaces during work.

Frequently Asked Questions (FAQs)

What type of consumables fits this plasma cutter?

Avoid sets of consumables like Lotos PCON40 and PCON90 because they are not compatible with this plasma cutter. Instead, use Lotos PCS33, PCS22, and other high-quality models.

What type of materials can I cut with this tool?

This cutting tool handles many types of metals like stainless steel, mild steel, alloy steel, aluminum, and copper. When you dial the amperage at 220/240V, the non-touch pilot Arc torch gives severance cuts on 3/4-inch (19mm) metals, and clean cuts on 1/2-inch (12mm) plates. Since the tool supports Dual Voltage regulation, set it at 110/120V for 1/8-inch mild steel and carbon steel.

Final Verdict

Lotos is a reputable manufacturer of welding and cutting tools. This LTP5000D Air Inverter plasma cutting tool comes handy for light-duty, DIY projects. However, it's compact design (15 x 6 x 12 inches) doesn't undermine the efficiency of its non-touch pilot Arc technology.

With these features, you can avoid the hassles of regular plasma cutting equipment. The air hose and ground clamp are industrial-grades that can withstand the effects of harsh conditions in any work environment. You'll make a great buying decision by adding this plasma cutter to your collection of work tools.

Read More Articles About Welding
No related posts for this content
Richard Boyer

Richard wants to educate you, inform you, and prepare you to make the best decision you can concerning welding related items.

Click Here to Leave a Comment Below 0 comments

Leave a Reply: