{"id":9951,"date":"2022-08-31T06:55:00","date_gmt":"2022-08-31T06:55:00","guid":{"rendered":"https:\/\/www.welderscave.com\/?p=9951"},"modified":"2022-08-30T18:59:26","modified_gmt":"2022-08-30T18:59:26","slug":"how-to-solder-copper-pipe-with-water-in-it","status":"publish","type":"post","link":"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/","title":{"rendered":"How to Solder Copper Pipe With Water in It"},"content":{"rendered":"\n<p>Solder is an alloy that is used to join two pieces of metal together. It has a low melting point and is easily melted with a soldering iron. Copper pipe can be soldered with water in it, but there are a few things to keep in mind. <br><br>First, the water will cause the solder to cool more quickly, so you&#8217;ll need to work quickly. Second, you&#8217;ll need to use a stronger solder than you would normally use for copper pipe without water in it.<\/p>\n\n\n\n<ul><li>1) Turn off the water to the pipe that you will be soldering<\/li><li> This is done by turning the knob or handle to the right, clockwise<\/li><li>\n2) Place a bucket or pan under the section of pipe that you will be soldering to catch any water that may drip out when the joint is opened<\/li><li>\n3) Apply flux paste to both the inside of the fitting and outside of the pipe<\/li><li> The flux helps remove oxidation from the surfaces and allows for a stronger bond between the Pipe and Fitting<\/li><li>\n4) Heat up your solder iron and touch it to both the fitting and pipe<\/li><li> You want to get them both hot enough so that when you touch solder to them, it will flow easily into<\/li><\/ul>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" src=\"https:\/\/contentgrid.homedepot-static.com\/hdus\/en_US\/DTCCOMNEW\/Articles\/how-to-solder-copper-pipes-step-1-A.jpg\" alt=\"How to Solder Copper Pipe With Water in It \"\/><\/figure>\n\n\n<p>Credit: www.homedepot.com <\/p>\n\n\n<h2><span id=\"Can_You_Solder_Copper_Pipe_With_Water_Inside\">Can You Solder Copper Pipe With Water Inside? <\/span><\/h2>\n\n\n\n<p>Can you solder copper pipe with water inside?\n\nThe answer is yes, you can solder copper pipe with water inside. There are a few things to keep in mind when doing so, however. <br><br>First, it&#8217;s important to make sure that the area around the joint is clean and free of any debris or contaminants. This will help ensure a good connection. Second, it&#8217;s important to use a flux that is compatible with both copper and water. <br><br>This will help prevent any reactions between the two materials. Finally, it&#8217;s important to heat the pipes evenly and carefully so as not to overheat them and cause damage.<\/p>\n\n\n\n<h2><span id=\"How_Do_You_Get_Water_Out_of_a_Pipe_before_Soldering\">How Do You Get Water Out of a Pipe before Soldering? <\/span><\/h2>\n\n\n\n<p>If you&#8217;re soldering a pipe and there is water inside, it&#8217;s important to get rid of the water before starting. There are a few ways to do this:\n\n&#8211; Use a plunger to try and force the water out. <br><br>This may take a few tries, but if it works, it&#8217;ll clear the pipe of water.\n\n&#8211; Another method is to use a blow dryer or heat gun to evaporate the water out of the pipe. This will take longer than using a plunger, but it will eventually get rid of all the water.\n\n<br><br>Once you&#8217;ve cleared the pipe of water, you can proceed with soldering.<\/p>\n\n\n\n<h2><span id=\"How_Do_I_Know_If_There_is_Water_in_My_Copper_Pipe\">How Do I Know If There is Water in My Copper Pipe? <\/span><\/h2>\n\n\n\n<p>If your copper pipe is leaking, it&#8217;s likely that there is water in it. To check for water in your copper pipe, start by feeling the outside of the pipe. If it&#8217;s wet, there&#8217;s a good chance that there&#8217;s water inside. <br><br>You can also try tapping on the pipe with a screwdriver or other hard object. If you hear a hollow sound, that means there&#8217;s likely water inside.\n\n\nOnce you&#8217;ve confirmed that there is water in your copper pipe, you&#8217;ll need to figure out where the leak is coming from. <br><br>Start by checking all of the fittings and connections for leaks. If you can&#8217;t find the source of the leak, you may need to cut into the pipe to take a closer look.\n\n\nIf you find a leak in your copper pipe, don&#8217;t panic! <br><br>There are a few different ways to repair it depending on how severe the leak is. For small leaks, you may be able to simply soldering them shut. For larger leaks, you&#8217;ll likely need to replace the entire section of piping.<\/p>\n\n\n\n<h2><span id=\"How_Do_You_Fix_a_Leaking_Copper_Pipe_Without_Solder\">How Do You Fix a Leaking Copper Pipe Without Solder? <\/span><\/h2>\n\n\n\n<p>If you have a copper pipe that is leaking, there are a few ways that you can fix it without having to solder the pipe. One way is to use a copper pipe repair clamp. This type of clamp will compress the leaky section of the pipe and stop the leak. <br><br>Another way to fix a leaking copper pipe is to use a sealant tape. This tape will create a watertight seal around the leaky section of the pipe and stop the water from coming out.<\/p>\n\n\n\n<h2><span id=\"How_to_Solder_Copper_Pipe_The_CORRECT_Way_GOT2LEARN\">How to Solder Copper Pipe The CORRECT Way | GOT2LEARN<\/span><\/h2>\n\n\n\n<figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe title=\"How to Solder Copper Pipe The CORRECT Way | GOT2LEARN\" width=\"500\" height=\"281\" src=\"https:\/\/www.youtube.com\/embed\/JyVbjDsric4?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<h2><span id=\"How_Do_You_Solder_a_Pipe_With_Water_in_It\">How Do You Solder a Pipe With Water in It <\/span><\/h2>\n\n\n\n<p>If you have a water pipe that needs soldering, there are a few things you need to do to ensure a successful job. First, make sure the area around the pipe is clean and dry. Then, apply flux to the area that needs soldering. <br><br>Next, heat up your solder until it&#8217;s melted, and then apply it to the joint between the pipe and fitting. Once the solder has cooled and hardened, turn on the water and check for leaks. If there are no leaks, you&#8217;re all done!<\/p>\n\n\n\n<h2><span id=\"Dissolvable_Pipe_Plug_for_Soldering\">Dissolvable Pipe Plug for Soldering <\/span><\/h2>\n\n\n\n<p>If you&#8217;ve ever soldered copper pipes, you know that it can be a messy job. You have to be careful not to get solder on the outside of the pipe, and sometimes it&#8217;s hard to avoid getting solder on your hands or clothes. But what if there was a way to make soldering easier and less messy?\n\n<br><br>Enter the dissolvable pipe plug. This handy little device is designed to be placed inside a copper pipe before soldering. Once the solder has cooled and hardened, the plug simply dissolves, leaving a clean, smooth interior surface. <br><br>No more scrubbing off excess solder!\n\nThe dissolvable pipe plug is easy to use and can make soldering a much simpler task. If you&#8217;re looking for an easier way to solder copper pipes, give dissolvable pipe plugs a try.<\/p>\n\n\n\n<h2><span id=\"How_to_Solder_Copper_Pipe_Without_Flame\">How to Solder Copper Pipe Without Flame <\/span><\/h2>\n\n\n\n<p>If you&#8217;re a beginner plumber or just need to fix a small leak, you can solder copper pipe without using a flame. This method is called cold soldering and it&#8217;s a quick and easy way to make a watertight seal on your pipes. Here&#8217;s what you need to know: <br><br>1. Gather your supplies. You&#8217;ll need some solder, an emery cloth or sandpaper, flux paste, and a soldering gun or iron. <\/p>\n\n\n\n<p>2. Clean the area around the leak with the emery cloth or sandpaper. This will help the solder adhere better. <\/p>\n\n\n\n<p>3. Apply flux paste to the area around the leak. This will also help the solder adhere better and prevent oxidation of the metal. <br><br>4. Place the tip of the soldering gun or iron against the flux paste and wait for it to get hot enough that it melts the solder. Then, touch the melted solder to the pipe and hold it there until it cools and forms a seal.<\/p>\n\n\n\n<h2><span id=\"Soldering_Copper_Pipe_Illegal\">Soldering Copper Pipe Illegal <\/span><\/h2>\n\n\n\n<p>If you&#8217;re a plumber, or even a do-it-yourselfer, you know that soldering copper pipe is an essential skill. But did you know that in some states, it&#8217;s actually illegal to solder copper pipe without a license?\n\nIn California, for example, the law requires that all persons who engage in the business of installing, repairing, or maintaining any gas piping system must be licensed by the state. <br><br>And while there are many different types of licenses available, none of them allow someone to legally solder copper pipe without also being certified by the state as a journeyman plumber.\n\nSo if you&#8217;re planning on doing any work with copper pipe in California, be sure to check the requirements for your particular project. Otherwise, you could end up facing some hefty fines.<\/p>\n\n\n\n<h2><span id=\"How_Long_to_Heat_Copper_Pipe_for_Solder\">How Long to Heat Copper Pipe for Solder <\/span><\/h2>\n\n\n\n<p>Copper pipe is a common material used in both plumbing and electrical applications. When soldering copper pipe, it is important to heat the pipe properly in order to melt the solder and create a strong bond. Here are some tips on how long to heat copper pipe for solder: <br><br>-The diameter of the copper pipe will determine how long it takes to heat up. A small diameter pipe will heat up quicker than a large diameter pipe. <\/p>\n\n\n\n<p>-The length of the copper pipe also plays a role in how long it takes to heat up. A shorter length of pipe will reach the desired temperature faster than a longer length of pipe. <\/p>\n\n\n\n<p>-If you are using an open flame torch, keep the flame moving while heating the copper pipe. This will help evenly distribute the heat and prevent hot spots from forming. <\/p>\n\n\n\n<p>-Once you see the solder start to melt, remove the flame and allow the area to cool slightly before applying pressure to join the two pieces together.<\/p>\n\n\n\n<h2><span id=\"Copper_Pipe_Joining_Methods\">Copper Pipe Joining Methods <\/span><\/h2>\n\n\n\n<p>Copper pipe is most commonly joined using one of four methods: soldering, brazing, compression fittings, or push-fit fittings. Each method has its own advantages and disadvantages that should be considered before selecting a joining method.\n\nSoldering is the most common method of joining copper pipe. <br><br>It is also the easiest method to learn and requires the least amount of equipment. Soldering is best suited for small diameter pipes and for making short joints since it can be difficult to apply enough heat to solder large diameter pipes or long joints.\n\nBrazing is similar to soldering but uses a higher temperature flame and a different type of metal alloy (called a brazing rod) to join the copper pipes. <br><br>Brazing can be used on larger diameter pipes and longer joints than soldering, but it requires more skill and experience.\n\nCompression fittings are quick and easy to use, but they are not as strong as soldered or brazed joints. Compression fittings are best suited for low-pressure applications such as water lines (not gas lines). <br><br>They are not recommended for areas where there is frequent freezing because the compressible rubber gasket in the fitting can crack when exposed to extreme cold temperatures.\n\nPush-fit fittings do not require any special tools or skills to install, making them ideal for do-it-yourself projects. Push-fit fittings rely on O-rings to create a seal so they are also not recommended for areas where there is frequent freezing. <br><br>Like compression fittings, push-fit connections are suitable for low-pressure applications but cannot be used with gas lines.<\/p>\n\n\n\n<h2><span id=\"Conclusion\">Conclusion <\/span><\/h2>\n\n\n\n<p>If you&#8217;re soldering copper pipe and there&#8217;s water in it, don&#8217;t worry! Just follow these simple steps and you&#8217;ll be able to do it without any problems. First, turn off the water to the pipe that you&#8217;ll be soldering. <br><br>Next, use a wire brush to clean the outside of the pipe where you&#8217;ll be applying solder. Then, apply heat to the area with a propane torch until the solder melts and flows into the joint. Finally, allow the joint to cool before turning the water back on.<\/p>\n\n\n\n<script type=\"application\/ld+json\">\n        {\n        \"@context\": \"https:\/\/schema.org\",\n        \"@type\": \"FAQPage\",\n      \"mainEntity\":[{\"@type\": \"Question\",\n        \n        \"name\": \"Can You Solder Copper Pipe With Water Inside? \",\n        \n        \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \n        \"text\": \"\n\nCan you solder copper pipe with water inside?\n\nThe answer is yes, you can solder copper pipe with water inside. There are a few things to keep in mind when doing so, however. First, it's important to make sure that the area around the joint is clean and free of any debris or contaminants. This will help ensure a good connection. Second, it's important to use a flux that is compatible with both copper and water. This will help prevent any reactions between the two materials. Finally, it's important to heat the pipes evenly and carefully so as not to overheat them and cause damage.\"\n\n        \n        }\n        }\n        ,{\"@type\": \"Question\",\n        \n        \"name\": \"How Do You Get Water Out of a Pipe before Soldering? \",\n        \n        \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \n        \"text\": \"\n\nIf you're soldering a pipe and there is water inside, it's important to get rid of the water before starting. There are a few ways to do this:\n\n- Use a plunger to try and force the water out. This may take a few tries, but if it works, it'll clear the pipe of water.\n\n- Another method is to use a blow dryer or heat gun to evaporate the water out of the pipe. This will take longer than using a plunger, but it will eventually get rid of all the water.\n\nOnce you've cleared the pipe of water, you can proceed with soldering.\"\n\n        \n        }\n        }\n        ,{\"@type\": \"Question\",\n        \n        \"name\": \"How Do I Know If There is Water in My Copper Pipe? \",\n        \n        \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \n        \"text\": \"\n\nIf your copper pipe is leaking, it's likely that there is water in it. To check for water in your copper pipe, start by feeling the outside of the pipe. If it's wet, there's a good chance that there's water inside. You can also try tapping on the pipe with a screwdriver or other hard object. If you hear a hollow sound, that means there's likely water inside.\n\n\nOnce you've confirmed that there is water in your copper pipe, you'll need to figure out where the leak is coming from. Start by checking all of the fittings and connections for leaks. If you can't find the source of the leak, you may need to cut into the pipe to take a closer look.\n\n\nIf you find a leak in your copper pipe, don't panic! There are a few different ways to repair it depending on how severe the leak is. For small leaks, you may be able to simply soldering them shut. For larger leaks, you'll likely need to replace the entire section of piping.\"\n\n        \n        }\n        }\n        ,{\"@type\": \"Question\",\n        \n        \"name\": \"How Do You Fix a Leaking Copper Pipe Without Solder? \",\n        \n        \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \n        \"text\": \"\n\nIf you have a copper pipe that is leaking, there are a few ways that you can fix it without having to solder the pipe. One way is to use a copper pipe repair clamp. This type of clamp will compress the leaky section of the pipe and stop the leak. Another way to fix a leaking copper pipe is to use a sealant tape. This tape will create a watertight seal around the leaky section of the pipe and stop the water from coming out.\"\n\n        \n        }\n        }\n        ]\n        }\n        <\/script>\n","protected":false},"excerpt":{"rendered":"<p>Solder is an alloy that is used to join two pieces of metal together. It has a low melting point and is easily melted with a soldering iron. Copper pipe can be soldered with water in it, but there are a few things to keep in mind. First, the water will cause the solder to [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":9950,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_lmt_disableupdate":"","_lmt_disable":""},"categories":[5],"tags":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v19.13 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Solder Copper Pipe With Water in It - Welders Cave<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Solder Copper Pipe With Water in It - Welders Cave\" \/>\n<meta property=\"og:description\" content=\"Solder is an alloy that is used to join two pieces of metal together. It has a low melting point and is easily melted with a soldering iron. Copper pipe can be soldered with water in it, but there are a few things to keep in mind. First, the water will cause the solder to [&hellip;]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/\" \/>\n<meta property=\"og:site_name\" content=\"Welders Cave\" \/>\n<meta property=\"article:published_time\" content=\"2022-08-31T06:55:00+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2022-08-30T18:59:26+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.welderscave.com\/wp-content\/uploads\/2022\/08\/d4bd5c941e6449c0bf2866446e40826d.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1280\" \/>\n\t<meta property=\"og:image:height\" content=\"720\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Peter Jacobs\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Peter Jacobs\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"11 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/\"},\"author\":{\"name\":\"Peter Jacobs\",\"@id\":\"https:\/\/www.welderscave.com\/#\/schema\/person\/276f896bd8aea6d72b3082eb35e61b67\"},\"headline\":\"How to Solder Copper Pipe With Water in It\",\"datePublished\":\"2022-08-31T06:55:00+00:00\",\"dateModified\":\"2022-08-30T18:59:26+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/\"},\"wordCount\":1840,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\/\/www.welderscave.com\/#organization\"},\"articleSection\":[\"Resource\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/\",\"url\":\"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/\",\"name\":\"How to Solder Copper Pipe With Water in It - Welders Cave\",\"isPartOf\":{\"@id\":\"https:\/\/www.welderscave.com\/#website\"},\"datePublished\":\"2022-08-31T06:55:00+00:00\",\"dateModified\":\"2022-08-30T18:59:26+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.welderscave.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Solder Copper Pipe With Water in It\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.welderscave.com\/#website\",\"url\":\"https:\/\/www.welderscave.com\/\",\"name\":\"Welders Cave\",\"description\":\"Your Fabrication Manager\",\"publisher\":{\"@id\":\"https:\/\/www.welderscave.com\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.welderscave.com\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.welderscave.com\/#organization\",\"name\":\"WeldersCave\",\"url\":\"https:\/\/www.welderscave.com\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.welderscave.com\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/www.welderscave.com\/wp-content\/uploads\/2019\/09\/WELDERSCAVE_LOGO.png\",\"contentUrl\":\"https:\/\/www.welderscave.com\/wp-content\/uploads\/2019\/09\/WELDERSCAVE_LOGO.png\",\"width\":1200,\"height\":226,\"caption\":\"WeldersCave\"},\"image\":{\"@id\":\"https:\/\/www.welderscave.com\/#\/schema\/logo\/image\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.welderscave.com\/#\/schema\/person\/276f896bd8aea6d72b3082eb35e61b67\",\"name\":\"Peter Jacobs\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.welderscave.com\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/98bc2504e0592cfed2c2dbf23ad95b60?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/98bc2504e0592cfed2c2dbf23ad95b60?s=96&d=mm&r=g\",\"caption\":\"Peter Jacobs\"},\"description\":\"Peter Jacobs is the Senior Director of Marketing at CNC Masters. He is actively involved in manufacturing processes and regularly contributes his insights to various blogs on CNC machining, 3D printing, rapid tooling, injection molding, metal casting, and manufacturing in general.\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Solder Copper Pipe With Water in It - Welders Cave","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/","og_locale":"en_US","og_type":"article","og_title":"How to Solder Copper Pipe With Water in It - Welders Cave","og_description":"Solder is an alloy that is used to join two pieces of metal together. It has a low melting point and is easily melted with a soldering iron. Copper pipe can be soldered with water in it, but there are a few things to keep in mind. First, the water will cause the solder to [&hellip;]","og_url":"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/","og_site_name":"Welders Cave","article_published_time":"2022-08-31T06:55:00+00:00","article_modified_time":"2022-08-30T18:59:26+00:00","og_image":[{"width":1280,"height":720,"url":"https:\/\/www.welderscave.com\/wp-content\/uploads\/2022\/08\/d4bd5c941e6449c0bf2866446e40826d.jpg","type":"image\/jpeg"}],"author":"Peter Jacobs","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Peter Jacobs","Est. reading time":"11 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/#article","isPartOf":{"@id":"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/"},"author":{"name":"Peter Jacobs","@id":"https:\/\/www.welderscave.com\/#\/schema\/person\/276f896bd8aea6d72b3082eb35e61b67"},"headline":"How to Solder Copper Pipe With Water in It","datePublished":"2022-08-31T06:55:00+00:00","dateModified":"2022-08-30T18:59:26+00:00","mainEntityOfPage":{"@id":"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/"},"wordCount":1840,"commentCount":0,"publisher":{"@id":"https:\/\/www.welderscave.com\/#organization"},"articleSection":["Resource"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/","url":"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/","name":"How to Solder Copper Pipe With Water in It - Welders Cave","isPartOf":{"@id":"https:\/\/www.welderscave.com\/#website"},"datePublished":"2022-08-31T06:55:00+00:00","dateModified":"2022-08-30T18:59:26+00:00","breadcrumb":{"@id":"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.welderscave.com\/how-to-solder-copper-pipe-with-water-in-it\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.welderscave.com\/"},{"@type":"ListItem","position":2,"name":"How to Solder Copper Pipe With Water in It"}]},{"@type":"WebSite","@id":"https:\/\/www.welderscave.com\/#website","url":"https:\/\/www.welderscave.com\/","name":"Welders Cave","description":"Your Fabrication Manager","publisher":{"@id":"https:\/\/www.welderscave.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.welderscave.com\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.welderscave.com\/#organization","name":"WeldersCave","url":"https:\/\/www.welderscave.com\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.welderscave.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.welderscave.com\/wp-content\/uploads\/2019\/09\/WELDERSCAVE_LOGO.png","contentUrl":"https:\/\/www.welderscave.com\/wp-content\/uploads\/2019\/09\/WELDERSCAVE_LOGO.png","width":1200,"height":226,"caption":"WeldersCave"},"image":{"@id":"https:\/\/www.welderscave.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.welderscave.com\/#\/schema\/person\/276f896bd8aea6d72b3082eb35e61b67","name":"Peter Jacobs","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.welderscave.com\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/98bc2504e0592cfed2c2dbf23ad95b60?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/98bc2504e0592cfed2c2dbf23ad95b60?s=96&d=mm&r=g","caption":"Peter Jacobs"},"description":"Peter Jacobs is the Senior Director of Marketing at CNC Masters. He is actively involved in manufacturing processes and regularly contributes his insights to various blogs on CNC machining, 3D printing, rapid tooling, injection molding, metal casting, and manufacturing in general."}]}},"modified_by":"Richard Boyer","_links":{"self":[{"href":"https:\/\/www.welderscave.com\/wp-json\/wp\/v2\/posts\/9951"}],"collection":[{"href":"https:\/\/www.welderscave.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.welderscave.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.welderscave.com\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.welderscave.com\/wp-json\/wp\/v2\/comments?post=9951"}],"version-history":[{"count":0,"href":"https:\/\/www.welderscave.com\/wp-json\/wp\/v2\/posts\/9951\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.welderscave.com\/wp-json\/wp\/v2\/media\/9950"}],"wp:attachment":[{"href":"https:\/\/www.welderscave.com\/wp-json\/wp\/v2\/media?parent=9951"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.welderscave.com\/wp-json\/wp\/v2\/categories?post=9951"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.welderscave.com\/wp-json\/wp\/v2\/tags?post=9951"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}